CNC gantry milling machine cleaning and maintenance methods are there?

CNC gantry milling used over a period of time, to conduct a comprehensive cleaning and maintenance. The following simple cleaning and maintenance methods of gantry milling:

1. The cleaning and maintenance tasks performed must be shop floor operators and must not be cleaned by others without permission.

2. Operators to organize their own dress. Do not put on the machine tool to wear, replace the clothes, or cloth and body to prevent the machine was hurt, must wear a helmet, braids should be placed in the hat, not to wear skirts, slippers.

3. Start gantry milling before the transmission to be checked, all tools, safety precautions are good, and finally check the gantry milling fast insurance and the stopper are not allowed to disassemble!

4. Gantry milling machine body may not place other items. To replace the bit and fixture to stop all operations, before replacement. If glitches or unclear items are not allowed into the spindle taper hole, loading and unloading bit to use wedge iron, no hand hammer beat.

5. Thin plates, large or long work piece vertical drilling, must be compacted, non-hand-held processing, the workpiece should be slow through the hole slow decompression, to prevent damage to the platform.

6 gantry milling rocker rotation range, shall not place other items, should be kept clean, remove iron filings to use a brush, no mouth blowing.

7. After work, you should cut off the power, and brake a good car to prevent accidents. At the same time cleaning tools, good machine maintenance work.

Only the gantry milling cleaning and maintenance, and can only be extended gantry milling time, can we get the most benefit.